Led small SMT Production Line: Smt Pick and Place Machine CHM-T530P4+Reflow Oven CHMRO-420+Stencil Printer CHM-T3040
REFLOW OVEN CHMRO-420
CHM-T530P4 LOW COST DESKTOP PICK AND PLACE MACHINE
| CHM-T530P4Specifications |
| Dimensions | 1060mm(L)×780mm(W)×600mm(H) |
| Weight | 115kg |
| Power Supply | AC220V (50Hz, single phase) /AC110V (60Hz, single phase);
400W |
| Air Supply | 0.5MPa~0.7MPa |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 4 |
| Mounting Speed | 8000cph(optimalwithout vision detection);
5500cph (optimal with vision detection) |
| Control Accuracy | 0.015mm |
| Component Type | 0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc.
(resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～400mm(L)×330mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System | Built-in computer (embedded Linux operating system),
7-inch touch screen |
| Drive System | X&Y-axisdriven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration |
| Transmission System | Synchronous belt + linear guide |
| Feeding System | 30 Yamaha standard pneumatic feeder stacks
(also suitable for Yamaha electric feeder, IC tray, and stick feeder), 11 preset general IC stacks, worksurface custom IC trays supported |
| Vision System | Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
Machine description:
CHMT530P4 has 4 heads, mounting speed is faster. For small SMT production, it is your good helper!
The operation system is embedded Linux system, the main board of machine was researched by ourselves, which is more reliable than windows system, and life time is much longer. CHMT530P4 using 502---507 different kinds of Juki nozzles, suitable for 0402,0603,0805-5050, SOP, QFN, LQFP, Diode, Transistor, BGA...etc, which can meet more customers' demand.
Vision System Ensure Accuracy
Auto correction offset
The double CCD vision cameras can auto calibrate the offset for all different kinds of components and ICs(auto correction of pick position and angle). Industry camera with high accuracy taking image of pins if IC, to ensure the patch accuracy.
30pcs Yamaha pneumatic feeder supported
simple & convenient operation
CHM-T530P4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime. pneumatic feeders can improve the working efficient a lot. It can also work with Yamaha vibration feeder.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly.
Z Axis Detection
Z axis detection function can self-checking the height and angle during placement.
Make sure machine work perfectly with different kinds of components.
9 kinds of Juki nozzles supported, magnet inside, you can change the nozzle by hand, no need wrench, very convenient.
Industry Touch Screen
Machine uses embedded Linux operation system, This system runs stable with strong compatibility and powerful function. Machine has a in-build 7 inch full touch screen, external USB mouse also accepted. Very easy and convenient operation. You can get a quick start within half an hour.
Mark point auto calibration
more accurate with vision system
After PCB has been put on machine, the machine will use the camera to automatically find the mark point, calibrate the PCB and avoid deviation.
Front IC Bulk Material Area
11pcs front bulk IC stack, suitable for some bulk ICs. more convenient.
IC Tray Supported
software allow 20 user-defined IC tray
User can add one or more IC tray in software, you just need to positioning the first component and the last component, then machine can auto continuous picking.
Package Weight: 146.0kg
Package Size: 117cm x 88cm x 80cm
Packing: wooden case (safe packing)
Company profile:
Our company Hunan Charmhigh Electromechanical Equipment Co., Ltd. is located in the Changsha High-tech Development Zone, covering a total area of 3600 square meters ,with more than 100 employees here.
As a professional modern science and technology enterprise capable of both R&D, production and marketing, Charmhigh has been leading the way in SMT technology for more than ten years.
Different series of multi-head full-automatic SMT machines have been developed and manufactured by Charmhigh to meet various practical production needs.
In accordance with the business philosophy of “Customer First, Innovation Paramount”, Charmhigh has enjoyed high fame at home and abroad.
If you have interest in our products please kindly contact me I will give you immediate reply .
Thanks & best regards
Ellen Meng
Hunan Charmhigh Electromechanical Equipment Co., Ltd.
Add.:104-604,Building D,Jingrong Tongxin International Industrial Park(jindao Park),NO 179 ,Huizhi Middle Road,HI-TECH Development Zone,Changsha ,Hunan,P.R.China
Tel:0086-731-85504084 Fax:0086-731-85504064
Cell/wechat/whatsapp/skype:0086-18974948067
www.charmhigh.com
|
|
Led small SMT Production Line: Smt Pick and Place Machine CHM-T530P4+Reflow Oven CHMRO-420+Stencil Printer CHM-T3040 Images
|
